Полиамид 6.6

Domamid 66gm305h

TECHNYL PROTECT A 60G1 V30 NC

Polyamide 66, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding
TECHNYL PROTECT A 60G1 V30 NC is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade offers excellent flame retardancy properties (UL 94, 5VA, GWIT) combined with excellent processing, mechanical and electrical performance. It can withstand temperatures of 160°C for over 6000 hours and has a UL F1 rating for weatherability resistance

(Previously DOMAMID FR 66G30V0E NC / TECHNYL A 60G1 V30 NATURAL)

TECHNYL PROTECT AT 20 V25 P BK

Polyamide 66/PET, 25% glass fiber reinforced, heat-aging stabilized, red phosphorous flame retardant, for injection moulding

(Previously DOMAMID FR 66G25V0P1A BK)

TECHNYL A 216S V15 NC

Polyamide 66, 15% glass fiber reinforced, for injection moulding

Previously DOMAMID 66G15

TECHNYL SAFE A 216FC S30 BK

TECHNYL SAFE A 216FC S30 BK is a polyamide 66, 30 % glass beads reinforced, food contact approved for injection moulding. Designed to
be used in moulded parts requiring excellent surface finish, low warpage and food contact compliance in industrial consumer good
applications as well as appliance applications.

Previously DOMAMID 66B30FC

TECHNYL A 218 V30 BK 34NG A

Polyamide 66, 30% glass fiber reinforced, heat-aging stabilized, hydrolisis stabilized, for injection molding, black. For Asian availability only.

Previously DOMAMID 66G30HR2 BK99

TECHNYL A 216 V30 BK 21N

TECHNYL A 216 V30 BK 21N is a polyamide 66, reinforced with 30% of glass fiber, for injection moulding. This grade offers an excellent
combination between thermal and mechanical properties

TECHNYL A 216 V30 NC

TECHNYL A 216 V30 NC is a polyamide 66, reinforced with 30% of glass fiber, for injection moulding. This grade offers an excellent
combination between thermal and mechanical properties.

TECHNYL A 205F NC

TECHNYL A 205F NC is an unreinforced polyamide 66 for injection moulding. This grade offers two main advantages: excellent filling
qualities and UL 94 V2 under 0.4 mm. It is particularly suitable for the moulding of long parts with thin wall sections

TECHNYL A 218G2 V30 BK 34N

TECHNYL A 218G2 V30 BK 34N is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade has
been specially designed to improve its resistance to automotive cooling liquids, increasing lifetime of parts in permanent contact with such
liquids.

TECHNYL 4EARTH A1E 218 V30 BK H

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding, black

TECHNYL 4EARTH A1E 318 V40 BK

Polyamide 66, reinforced with 40% of glass fibre, heat stabilized, for extrusion, black

Previously TECHNYL XA4E 1753 BLACK

TECHNYL 4EARTH A1E 60G1 V30 GY R7035

TECHNYL 4Earth A1E 60G1 V30 GY R7035 is a partially recycled polyamide 66 based on a non-halogenated flame retardant system,
reinforced with 30% of glass fiber, heat stabilized for injection moulding.
This partially recycled material has been developed to reduce its environmental footprint (3,4 kg CO2 eq. according to IPCC 2013 100a
methodology) with respect to first-choice materials while offering excellent & identical flame retardant properties (UL 94 V0 - GWFI 960°C all
at 0.8 mm thickness). It also offers unchanged mechanical and electrical performances with respect to virgin materials. It is already all
colors UL yellow card registered for short-term properties (UL 94, 5VA, HWI, HAI, CTI) waiting for RTI ratings completion.

Previously XA4E 1780 R7035

TECHNYL A 208F BK 21N

TECHNYL A 208F BK 21N is an unreinforced polyamide PA66, heat stabilized, high fluidity, fast cycling grade, for injection moulding. This
grade offers two main advantages: its good resilience and its excellent filling quality of moulds.

TECHNYL A 216 NC

TECHNYL A 216 NC is an unreinforced polyamide 66, standard viscosity, for injection moulding. This grade offers all of the primary
properties of unreinforced polyamide 66: thermal and mechanical properties, chemical resistance, impact and abrasion resistance.

TECHNYL A 216 S30 NC

TECHNYL A 216 S30 NC is a polyamide 66 reinforced with 30% of glass beads, standard viscosity, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 216 V20 NC

TECHNYL A 216 V20 NC is a polyamide 66, reinforced with 20% of glass fiber, for injection moulding. This grade offers an excellent
combination between thermal and mechanical properties.

TECHNYL A 217 BK 1N

TECHNYL A 217 BK 1N is an unreinforced polyamide 66, heat stabilized, standard viscosity, for injection moulding. This grade offers all the
primary properties of unreinforced polyamide 66. In addition it has improved resistance to high temperature and it can be used for
components which have to withstand mid term temperature stresses. This grade can also be vacuum metalized with very good surface
quality and adhesion of the aluminum surface.

TECHNYL A 218 MZ15 V25 BK 31N

TECHNYL A 218 MZ15 V25 BK 31N is a polyamide 66, reinforced with 25% of glass fibre and 15% of mineral filler, heat stabilized, for injection
moulding. This grade is available in black color. This grade offers an excellent combination between thermal and mechanical properties as
well as a low warpage of molded parts.

TECHNYL A 218 NC

TECHNYL A 218 NC is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding. This grade offers all the
primary properties of unreinforced polyamide 66. In addition, it has improved resistance to high temperature, and can be used for
components which will withstand long-term temperature stresses.

TECHNYL A 218 V15 BK 21N

TECHNYL A 218 V15 BK 21N is a polyamide 66, reinforced with 15% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V15 NC

TECHNYL A 218 V15 Natural is a polyamide 66, reinforced with 15% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V25 BK 21N

TECHNYL A 218 V25 BK 21N is a polyamide 66, reinforced with 25% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V25 NC

TECHNYL A 218 V25 NC is a polyamide 66, reinforced with 25% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V30 BK 21NS

TECHNYL A 218 V30 BK 21NS is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized, for injection moulding.

TECHNYL A 218 V30 BK 34NG

TECHNYL A 218 V30 BK 34NG is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade has
been specially designed to improve its resistance to automotive cooling liquids, increasing lifetime of parts in permanent contact with such
liquids.

Previously TECHNYL A 218 V30 BLACK 34NG

TECHNYL A 218 V30 NC

TECHNYL A 218 V30 NC is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V35 BK 21N

TECHNYL A 218 V35 BK 21N is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V35 BK 34NG

TECHNYL A 218 V35 BK 34NG is a polyamide 66, reinforced with 35% of glass fiber, heat stabilized, for injection moulding. This grade has
been specially designed to improve its resistance to automotive cooling liquids, increasing lifetime of parts in permanent contact with such
a liquids.

TECHNYL A 218 V35 NC

TECHNYL A 218 V35 NC is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V40 BK 21N

TECHNYL A 218 V40 BK 21N is a polyamide 66, reinforced with 40% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V40 NC

TECHNYL A 218 V40 NC is a polyamide PA66, reinforced with 40% of glass fibre, heat stabilised for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V50 BK 21N

TECHNYL A 218 V50 BK 21N is a polyamide 66, reinforced with 50% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V50 NC

TECHNYL A 218 V50 NC is a polyamide 66, reinforced with 50% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218G V30 NC

TECHNYL A 218G V30 NC is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade has been
specially designed to improve its resistance to automotive cooling liquids, increasing lifetime of parts in permanent contact with such
liquids.

TECHNYL A 218G1 V25 BK 34N

TECHNYL A 218G1 V25 BK 34N is a polyamide 66, reinforced with 25% of glass fiber, heat stabilized, for injection moulding. This grade has
been specially designed to improve its resistance to automotive cooling liquids, increasing lifetime of parts in permanent contact with such
liquids.

TECHNYL A 218G2 V50 BK 34N

TECHNYL A 218G2 V50 BK 34N is a polyamide 66, reinforced with 50% of glass fiber, heat stabilized, for injection moulding. This grade has
been specially designed to improve its resistance to automotive cooling liquids, increasing lifetime of parts in permanent contact with such
liquids.

TECHNYL A 218HP V30 BK 21N

TECHNYL A 218HP V30 BK 21N is a polyamide 6.6, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade is
designed to offer a long term heat resistance and is suitable to work in environments characterized by a very high temperature. (200°C)

TECHNYL A 218HP V50 BK 21N

TECHNYL A 218HP V50 BK 21N is a polyamide 66, reinforced with 50% of glass fibre, heat stabilized, for injection moulding. This grade is
designed to offer a long term heat resistance and is suitable to work in environments characterized by a very high temperature. (200°C)

TECHNYL A 221 NC

TECHNYL A 221 NC is an unfilled polyamide 66, for injection moulding, with a special crystallizing agent, for fast cycles. This grade offers a
good combination between primary properties of the unreinforced polyamide 66 and processing properties leading to increased
productivity. These performances are associated with excellent dimensional stability and good rigidity of moulded parts.

TECHNYL A 221T1 NC S

TECHNYL A 221T1 NC S is an unfilled polyamide 66, with a special crystallizing agent for very fast cycles, with improved thermal stability, for
injection moulding. This grade offers a good combination between primary properties of the unreinforced polyamide 66 and processing
properties leading to increased productivity. These performances are associated with excellent dimensional stability and good rigidity of
moulded parts. It is designed to be used in food contact applications.

TECHNYL A 222 BK 1N

TECHNYL A 222 BK 1N is an unfilled polyamide 66, heat stabilized, medium viscosity, for injection moulding, fast crystallization, for short
cycles. This grade offers a good combination between primary properties of the unreinforced polyamide 66 and processing properties
leading to increased productivity. These performances are associated with excellent dimensional stability and good rigidity of moulded
parts.

TECHNYL A 225F NC

TECHNYL A 225F NC is an unfilled polyamide 66, medium viscosity, for injection moulding, with a special crystallizing agent, for very fast
cycles. This grade offers a good combination between primary properties of the unreinforced polyamide 66 and processing properties
leading to increased productivity. These performances are associated with excellent dimensional stability, and excellent filling qualities. The
UL94 V2 rating at 0.4mm makes that the product is particularly used in electrical applications.

TECHNYL A 238 V13 BK 21N

TECHNYL A 238 V13 BK 21N is a polyamide 6.6, reinforced with 13% of glass fiber, heat stabilized, impact modified, for injection moulding.
This grade offers excellent combination between rigidity and impact resistance at ambient temperature.

TECHNYL A 238F BK

TECHNYL A 238F BK is an unfilled polyamide 6.6 impact modified with an improved flowability, heat stabilized, for injection moulding. This
grade offers excellent combination between rigidity and impact resistance at ambient temperature and flowability.

TECHNYL A 246M BK 21N

TECHNYL A 246M BK 21N is an unfilled polyamide 6.6, impact modified, for injection moulding. This grade offers an excellent impact
resistance, even at low temperature.

TECHNYL AR 130/GF BLACK

TECHNYL AR 130/GF BLACK is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. It contains recycled
raw materials. This grade offers a good combination between thermal and mechanical properties. This product is not suitable for hot
runners. The data provided in this document are based on mean values of a significant number of measurements. However as this products
contains recycled materials, its properties may vary over a larger range than a material made from virgin raw materials.

TECHNYL AR 218 V50 BK

TECHNYL AR 218 V50 BK is a polyamide 66, reinforced with 50% of glass fibre, heat stabilized, for injection moulding. It contains recycled
materials. This grade offers a good combination between thermal and mechanical properties.

TECHNYL PROTECT A 20 V25 BK 25

TECHNYL PROTECT A 20 V25 BK 25 is a Red Phosphorous flame retardant polyamide 66, reinforced with 25% of glass fiber, heat stabilized,
for injection moulding. This grade provides robust UL 94 V-0 and a full UL yellow card while offering good mechanical properties. This grade
is suitable for moulding insulating parts for electrical devices, and more generally for thin parts under stress.

Previously TECHNYL A 20 V25 BLACK 25

TECHNYL PROTECT A 20 V25 NC

TECHNYL PROTECT A 20 V25 NC is a Red Phosphorous flame retardant polyamide 66, reinforced with 25% of glass fiber, heat stabilized, for
injection moulding. This grade provides robust UL 94 V-0 and a full UL yellow card while offering good mechanical properties. This grade is
suitable for moulding insulating parts for electrical devices, and more generally for thin parts under stress.

Previously TECHNYL A 20 V25 NATURAL

TECHNYL PROTECT A 20 V35 BK 25

TECHNYL PROTECT A 20 V35 BK 25 is a Red Phosphorous flame retardant polyamide 66, reinforced with 35% of glass fiber, heat stabilized,
for injection moulding. This grade provides robust UL 94 V-0 and a full UL yellow card while offering good mechanical properties. This grade
is suitable for moulding insulating parts for electrical devices, and more generally for thin parts under stress.

Previously TECHNYL A 20 V35 BLACK 25

TECHNYL PROTECT A 21T3 V25 BK 15N

TECHNYL PROTECT A 21T3 V25 BK 15N is a Red Phosphorous flame retardant polyamide 66, reinforced with 25% of glass fibre, heat
stabilized, impact improved, for injection moulding. This flame retardant grade offers excellent filling qualities and with good mechanical
properties. This grade is stabilized to offer a very low migration and corrosion of metallic contacts.

Previously TECHNYL A 21T3 V25 BLACK 15N

TECHNYL PROTECT A 60G1 V25 GY 7035

TECHNYL PROTECT A 60G1 V25 GY 7035 is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 25% of
glass fiber, heat stabilized, for injection moulding. This grade offers excellent flame retardancy properties (UL 94, 5VA, GWIT) combined with
excellent processing, mechanical and electrical performance.

Previously TECHNYL A 60G1 V25 GREY 7035

TECHNYL PROTECT A 60G1 V25 GY R7035 LPU

TECHNYL PROTECT A 60G1 V25 GY R7035 LPU is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 25%
of glass fiber, heat stabilized, laser markable for injection moulding. This grade offers excellent flame retardancy properties (UL 94, 5VA,
GWIT) combined with excellent processing, mechanical and electrical performance.

Previously TECHNYL A 60G1 V25 GREY R7035 LPU

TECHNYL PROTECT A 60G1 V25 WT R9003

TECHNYL PROTECT A 60G1 V25 WT R9003 is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 25% of
glass fiber, heat stabilized, for injection molding. This grade offers excellent flame retardancy properties (UL 94, 5VA, GWIT) combined with
excellent processing, mechanical and electrical performance.

Previously TECHNYL A 60G1 V25 WHITE R9003

TECHNYL PROTECT A 60G1 V30 BK 15N

TECHNYL PROTECT A 60G1 V30 BK 15N is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 30% of glass
fiber, heat stabilized, for injection moulding. This grade offers excellent flame retardancy properties (UL 94, 5VA, GWIT) combined with
excellent processing, mechanical and electrical performance. It can withstand temperatures of 160°C for over 6000 hours and has a UL F1
rating for weatherability resistance.

Previously TECHNYL A 60G1 V30 BLACK 15N

TECHNYL PROTECT A 60G1 V30 GY R7035 LPU

TECHNYL PROTECT A 60G1 V30 GY R7035 LPU is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 30%
of glass fiber, heat stabilized, laser markable for injection moulding. This grade offers excellent flame retardancy properties (UL 94, 5VA,
GWIT) combined with excellent processing, mechanical and electrical performance. It can withstand temperatures of 160°C for over 6000
hours and has a UL F1 rating for weatherability resistance.

Previously TECHNYL A 60G1 V30 GREY R7035 LPU

TECHNYL PURE A 219E1 V33 BK

TECHNYL PURE A 219E1 V33 BK is a polyamide PA66 reinforced with 33% of glass fibre, organic heat stabilized, for injection moulding. This
grade offers an excellent combination between thermal and mechanical properties. This grade offers a formula clean from additive that
contain halogen and other sustances (ex: phosphorus) that can migrate and generate corrosion issues. < 50ppm halogen content
garanteed, based on internal elution analysis.Electrofriendly heat satbilized grade. Suitable for laser printing.

Previously TECHNYL A 219E1 V33 BLACK)

TECHNYL SAFE A 216FC NC

TECHNYL SAFE A 216FC NC is a polyamide 66, unfilled, food contact approved for injection moulding. Designed to be used in moulded
parts requiring food contact compliance in industrial consumer good as well as appliances applications.

Previously TECHNYL A 216 NATURAL FA

TECHNYL SAFE A 216FC V30 BK

TECHNYL SAFE A 216FC V30 BK is a polyamide 66, 30% glass fiber reinforced, food contact approved for injection moulding. Designed to be
used in moulded parts requiring an excellent combination of thermal amd mechanical properties and food contact compliance in
industrial consumer good as well as appliances applications.

Previously TECHNYL A 216 V30 BLACK FA

TECHNYL SAFE A 216FC V30 NC

TECHNYL SAFE A 216FC V30 NC is a polyamide 66, 30% glass fiber reinforced, food contact approved for injection moulding. Designed to be
used in moulded parts requiring an excellent combination of thermal amd mechanical properties and food contact compliance in
industrial consumer good as well as appliances applications.

Previously TECHNYL A 216 V30 NATURAL FA

TECHNYL SAFE A 219WFC V30 BK

TECHNYL SAFE A 219WFC V30 BK is a polyamide 66, 30% glass fibre reinforced, heat stabilized with organic stabiliser for injection moulding.
Designed to offer an improved hydrolisis resistance and chlorine resistance vs standard PA66, for cold, warm and hot temperature in
domestic and industrial water management components including, but not limited to components in contact with drinking water where
elevated levels of chlorine could be present.

Previously TECHNYL A 218W V30 BLACK FA

TECHNYL SAFE A 219WFC V30 NC

TECHNYL SAFE A 219WFC V30 NC is a polyamide 66, 30% glass fibre reinforced, heat stabilized with organic stabiliser for injection moulding.
Designed to offer an improved hydrolisis resistance and chlorine resistance vs standard PA66, for cold, warm and hot temperature in
domestic and industrial water management components including, but not limited to components in contact with drinking water where
elevated levels of chlorine could be present.

Previously TECHNYL A 218W V30 NATURAL

TECHNYL SAFE A 221FC NC

TECHNYL SAFE A 221FC NC is a polyamide 66, unfilled, food contact approved for injection moulding with a special crystallizing agent for
fast cycles. Designed to offer increased productivity associated with excellent dimensional stability and good rigidity of moulded parts
requiring food contact compliance in industrial consumer good and appliance applications.

Previously TECHNYL A 221 NATURAL FA

TECHNYL SAFE A 222FFC NC

TECHNYL SAFE A 222FFC NC is a polyamide 66, unfilled, food contact approved, for injection moulding with a special crystallizing agent for
fast cycles. Designed to offer increased productivity associated with excellent dimensional stability and good rigidity of moulded parts
requiring food contact compliance in industrial consumer good and appliance applications.

Previously TECHNYL A 222F NATURAL FA

TECHNYL SAFE A 302FC NC

TECHNYL SAFE A 302FC NC is a polyamide PA66, unfilled, medium viscosity, food contact approved for extrusion and injection moulding.
Designed to offer high impact resistance, good rigidity and excellent compression resistance of extruded and moulded parts requiring food
contact compliance in industrial consumer good as well as appliances applications.

Previously TECHNYL A 302 NATURAL FA

TECHNYL SLIDE A 216 V30 Y17 N NC

TECHNYL SLIDE A 216 V30 Y17 N NC is a polyamide 66, reinforced with 30% of glass fibre, modified with molybdenum disulphide and
graphite, for injection moulding. This grade offers an excellent combination between thermal and mechanical properties. This grade has a
low friction coefficient.

Previously TECHNYL A 216 V30 Y17 N NATURAL

TECHNYL 4EARTH A1E 60G1 V30 NC

Polyamide 66, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.
TECHNYL 4EARTH A1E 60G1 V30 NC is a partially recycled polyamide 66 based on a non-halogenated flame retardant system, reinforced
with 30% of glass fiber, heat stabilized, for injection moulding.
This partially recycled material has been developed to reduce its environmental footprint (3,4 kg CO2 eq. according to IPCC 2013 100a
methodology) with respect to first-choice materials while offering excellent & identical flame retardant properties (UL 94 V0 - GWFI 960°C all
at 0.8 mm thickness). It also offers unchanged mechanical and electrical performances with respect to virgin materials. It is already all
colors UL yellow card registered for short-term properties (UL 94, 5VA, HWI, HAI, CTI) waiting for RTI ratings completion.

TECHNYL 4EARTH A2E 219 V30 BK

Polyamide 66, 30% glass fiber reinforced, heat-aging stabilized, for injection moulding, black.

Previously ECONAMID PLUS 66G30H1 BK

TECHNYL 4EARTH A9E 218 C30 NC H

Polyamide 66, 30% carbon fiber reinforced, heat-aging stabilized, for injection moulding, natural color.

Previously ECONAMID AIR 66RC30H2 NC99

TECHNYL AX 239S C30 NC

Polyamide 66, 30% carbon fiber reinforced, heat-aging stabilized, impact modified, for injection moulding, natural color.

Previously DOMAMID XS 66C30I2H1 119 NC99

TECHNYL MAX A 219 XV65 NC

Polyamide 66, 65% glass fiber reinforced, heat-aging stabilized, for injection moulding, natural color.

Previously DOMAMID XS 66V65H1 119 NC

TECHNYL PROTECT A 60G1 V30 BK

Polyamide 66, 30% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 66G30V0E BK

TECHNYL 4EARTH A2E 238 BK

Polyamide 66, heat-aging stabilized, impact modified, for injection moulding.

Previously DOMAMID R 66I3H2 BK

TECHNYL A 219 NC BL

Polyamide 66, heat-aging stabilized, for injection moulding. For Asian availability only.

Previously DOMAMID 66H1 NCBL

TECHNYL A 219 V30 BK

TECHNYL A 219 V30 BK is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized, for injection moulding. This grade offers an
improved hydrolisis resistance, as well as an excellent combination between thermal and mechanical properties. It is also restricts
eletrolytical corrosion.

Previously TECHNYL A 218W V30 BLACK TE

TECHNYL MAX A 219 XV50 BK

Polyamide 66, 50% flat glass fiber reinforced, heat-aging stabilized, for injection moulding

Previously DOMAMID XS 66V50H1 BK

TECHNYL MAX A 219 XV50 BR 8065

Polyamide 66, 50% glass fiber reinforced, heat-aging stabilized, for injection moulding

Previously DOMAMID XS 66V50H1 BW88065

TECHNYL MAX A 219 XV50 GN 6079

Polyamide 66, 50% glass fiber reinforced, heat-aging stabilized, for injection moulding

Previously DOMAMID XS 66V50H1 GN66079

TECHNYL MAX A 219 XV50 GY 7532

Polyamide 66, 50% glass fiber reinforced, heat-aging stabilized, for injection moulding

Previously DOMAMID XS 66V50H1 GY77532

TECHNYL 4EARTH A2E 219 V35 BK

Polyamide 66, 35% glass fiber reinforced, organic heat stabilized, for injection moulding, black

Previously ECONAMID FL 66G35H1 BK

TECHNYL 4EARTH A2E 219 V35 BK H

Polyamide 66, 35% glass fiber reinforced, organic heat stabilized, for injection moulding, black

Previously ECONAMID FL 66G35H1 BK

TECHNYL A 205F GY 2566

TECHNYL A 205F GY 2566 is an unreinforced polyamide 66 for injection moulding. This grade offers two main advantages: excellent filling
qualities and UL 94 V2 under 0.8 mm. It is particularly suitable for the moulding of long parts with thin wall sections.

TECHNYL A 236SI V12 BK

Polyamide 66, 12% glass fiber reinforced, low temperature impact modified, for injection moulding

Previously DOMAMID 66G12IK1 BK

TECHNYL AR 218 V30 BK

TECHNYL AR 218 V30 BK is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. It contains recycled
materials. This grade offers a good combination between thermal and mechanical properties.

TECHNYL PROTECT A 30H1 V30 NC

TECHNYL PROTECT A 30H1 V30 NC is a flame retardant polyamide 66, reinforced with 30% of glass fibre, for injection moulding.

Previously TECHNYL A 30H1 V30 NATURAL

TECHNYL PROTECT A 60G1 V25 GY 2622

TECHNYL PROTECT A 60G1 V25 GY 26223 is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 25% of
glass fiber, heat stabilized, for injection molding. This grade offers excellent flame retardancy properties (UL 94, 5VA, GWIT) combined with
excellent processing, mechanical and electrical performance.

TECHNYL XA 1722 ORANGE 2702

TECHNYL XA 1722 Orange 2702 is a polyamide PA 66, reinforced with 30% of glass fiber, self-coloured in Orange RAL 2003 & is suitable for
Injection-moulding. This grade offers a unique Polyamide 66 solution for E-Mobility applications requiring Orange color as a functional
property during all application lifetime. Thanks to a specific combination of coloring additives & thermal stabilizers, this grade exhibits an
undisputable high color retention under thermal stress with a Polyamide based material. It provides consequently all benefits associated to
a Polyamide compound, superior electrical insulation performances & high mechanical properties. It is furthermore suitable for UV laser-
marking.

TECHNYL 4EARTH A1E 218 V30 BK 34NG LP

Polyamide 66, 30% glass fiber reinforced, , black

Previously XA4E 1782 BK

TECHNYL 4EARTH A1E 218 V50 BK H

Polyamide 66, reinforced with 50% of glass fiber, heat stabilized, for injection moulding, black

Previously TECHNYL 4EARTH A4E 218 V50 BLACK

TECHNYL 4EARTH A2E 238 NC

Polyamide 66, heat-aging stabilized, impact modified, for injection moulding

Previously DOMAMID R 66I3H2 NC

TECHNYL 4EARTH A2E 32G1M BK

Polyamide 66, impact modified, heat-aging stabilized, for injection moulding, black

Previously ECONAMID FR 66I1GTI85A

TECHNYL 4EARTH A5E 216M NC H

Polyamide 66, improved impact resistance, for injection moulding, black

Previously ECONAMID FL 66 500

TECHNYL A 205F BK 21N

TECHNYL A 205F BK 21N is an unreinforced polyamide 66 for injection moulding. This grade offers two main advantages: excellent filling
qualities and UL 94 V2 under 0.4 mm. It is particularly suitable for the moulding of long parts with thin wall sections

TECHNYL A 208F2 NC

Polyamide 66, heat-aging stabilized, improved flowability, for injection molding, natural color

TECHNYL A 216 BG 2160

TECHNYL A 216 BG 2160 is an unreinforced polyamide 66, standard viscosity, for injection moulding.

Previously DOMAMID 66 BG12160

TECHNYL A 216 GY 53N

TECHNYL A 216 GY 53N is an unreinforced polyamide 66, standard viscosity, for injection moulding.

TECHNYL A 216 V20 BK 21N

TECHNYL A 216 V20 BK 21N is a polyamide 66, reinforced with 20% of glass fibre, for injection moulding. This grade offers an excellent
combination between thermal and mechanical properties.

TECHNYL A 216 V30 WT 16N

TECHNYL A 216 V30 WT 16N is a polyamide 66, reinforced with 30% of glass fiber, for injection moulding. This grade offers an excellent
combination between thermal and mechanical properties.

TECHNYL A 216HR V25 BK

Polyamide 66, 25% glass fiber reinforced, hydrolisis stabilized, for injection moulding

Previously DOMAMID 66G25HR1 BK

TECHNYL A 216T V33 BK 1N

TECHNYL A 216T V33 BK 1N is a polyamide PA66 reinforced with 33% of glass fibre, heat stabilized, for injection moulding. This grade offers
an excellent combination between thermal and mechanical properties.

TECHNYL A 218 BK 21N

TECHNYL A 218 BK 21N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding. This grade offers all the
primary properties of unreinforced polyamide 66. In addition, it has improved resistance to high temperature, and can be used for
components which will withstand long-term temperature stresses.

TECHNYL A 218 S30 BK 21N

TECHNYL A 218 S30 BK 21N is a Polyamide PA66, reinforced with 30% of glass spheres, Heat stabilised, for injection moulding. This grade
offers an excellent combination between thermal and mechanical properties.

TECHNYL A 218 S40 BK 21N

TECHNYL A 218 S40 BK 21N is a Polyamide PA66, reinforced with 40% of glass spheres, Heat stabilised, for injection moulding. This grade
offers an excellent combination between thermal and mechanical properties.

TECHNYL A 218 V20 BK 21N

TECHNYL A 218 V20 BK 21N is a polyamide 66, reinforced with 20% of glass fibre, heat stabilized, for injection moulding. This grade offers an
excellent combination between thermal and mechanical properties.

TECHNYL A 218 V30 BK 34NG LP

Polyamide 66, 30% glass fiber reinforced, lasermarkable, for injection molding, black.

TECHNYL A 218 V50 BK 21NK

TECHNYL A 218 V50 BK 21NK is a polyamide 66, reinforced with 50% of glass fibre, heat stabilized, for injection molding. This grade offers an
excellent combination betwwen thermal and mechanical properties.

TECHNYL A 218 V50 NC T

The TECHNYL A 218 V50 NC T is a polyamide 66, 50% glass fiber reinforced, specially heat stabilized for high temperature, for injection
moulding.

TECHNYL A 218HP V35 BK 21N

TECHNYL A 218HP V35 BK 21N is a polyamide 6.6, reinforced with 35% of glass fiber, heat stabilized, for injection moulding. This grade is
designed to offer a long term heat resistance and is suitable to work in environments characterized by a very high temperature. (200°C).

TECHNYL A 219 V40 NC

Polyamide 66, 40% glass fiber reinforced, heat-aging stabilized, for injection moulding, natural color.

Previously DOMAMID 66G40H1 NC

TECHNYL A 222 NC

TECHNYL A 222 NC is an unfilled polyamide 66, heat stabilized, medium viscosity, for injection moulding, fast crystallization, for short cycles.
This grade offers a good combination between primary properties of the unreinforced polyamide 66 and processing properties leading to
increased productivity. These performances are associated with excellent dimensional stability and good rigidity of moulded parts.

TECHNYL A 236 V15 BK

Polyamide 66, 15% glass fiber reinforced, impact modified, for injection moulding.

Previously DOMAMID 66G15I1 504 BK

TECHNYL A 239HR V30 NC

Polyamide 66, 30% glass fiber reinforced, hydrolisis stabilized, impact modified, heat-aging stabilized, for injection moulding.

Previously DOMAMID 66G30I1HR1H1 NC

TECHNYL A 246 NC

Polyamide 66, impact modified, for injection moulding.

Previously DOMAMID 66I4 NC

ECHNYL A 256P1 BK 2N

TECHNYL A 256P1 BK 2N is an unfilled polyamide 66, impact modified for injection moulding. This grade offers an excellent impact
resistance at ambient and low temperature and a high flexibility.

TECHNYL AR 218 V25 BK

TECHNYL AR 218 V25 BK is a polyamide 66, reinforced with 25% of glass fiber, heat stabilized, for injection moulding. It contains recycled
materials. This grade offers a good combination between thermal and mechanical properties.

TECHNYL PROTECT A 31H1 V25 NC

TECHNYL A 31H1 V25 NC is a flame retardant polyamide PA66, reinforced with 25% of glass heat stabilised, for injection moulding.

TECHNYL PROTECT A 32G1 BK

TECHNYL PROTECT A 32G1 BK is a polyamide 66 based on a brominated flame retardant system, unreinforced, heat stabilized, for injection
molding.

Previously TECHNYL A 32G1 BLACK

TECHNYL PROTECT A 60G1 V25 BK

Polyamide 66, 25% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 66G25V0E

TECHNYL PROTECT A 60X1 V25 NC

TECHNYL A 60X1 V25 NC is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 25% of glass fiber, heat
stabilized, for injection moulding. This grade offers excellent flame retardancy properties (UL94 V0, UL94 5VA, GWIT) combined with
excellent processing, mechanical and electrical performance. The data provided are based on laboratory/experimental results. These data
could be adjusted after industrial production.

Previously TECHNYL A 60X1 V25 NC

TECHNYL SAFE A 402FC NC

TECHNYL SAFE A 402FC NC is a polyamide PA66, unfilled, very high viscosity, food contact approved for extrusion. Designed to offer higher
impact resistance at low humidity levels, good rigidity and excellent compression resistance of extruded parts requiring also food contact
compliance in industrial consumer good as well as appliance applications.

Previously TECHNYL A 402 NATURAL FA

TECHNYL SHAPE A 402H1 NC

TECHNYL SHAPE A 402H1 NC is an unreinforced polyamide 66, very high viscosity, heat stabilized, for extrusion and injection moulding. This
grade offers three main advantages: high impact resistance at low humidity levels, good rigidity, and excellent compression resistance.

Previously TECHNYL A 402H1 NATURAL

TECHNYL SHAPE A 548B V15 BK 23N

TECHNYL SHAPE A 548B V15 BK 23N is a polyamide 66 reinforced with 15% of glass fibre, heat stabilized, impact modified, for blow
moulding. This grade offers an excellent long term Heat resistance and is suitable to work in environments characterized by a very high
temperature. It has been also specially designed to be perfectly suitable for blow moulding processing.

Previously TECHNYL A 548B V15 BLACK 23N

TECHNYL SLIDE A 216 V30 TF15 BK

Polyamide 66, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID L 66G30TF15

TECHNYL STAR AF 218 V25 BK 21N

TECHNYL STAR AF 218 V25 BK 21N is a polyamide 6.6, high flow, reinforced with 25% of glass fiber, heat stabilized, for injection moulding.
Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished
part. This grade is ideal for use in the automotive industry for engine components. This grade is ideal for Mucell® injection moulding
technology.

TECHNYL STAR AF 218 V30 BK 21N

TECHNYL STAR AF 218 V30 BK 21N is a polyamide 6.6, high flow, reinforced with 30% of glass fiber, heat stabilized, for injection moulding.
Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished
part.his grade is ideal for use in the automotive industry for engine components. This grade is ideal for Mucell® injection moulding
technology.

TECHNYL STAR AF 218 V35 BK 21N

TECHNYL STAR AF 218 V35 BK 21N is a polyamide 6.6, high flow, reinforced with 35% of glass fiber, heat stabilized, for injection moulding.
Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished
part. This grade is ideal for use in the automotive industry for engine components. This grade is ideal for Mucell® injection moulding
technology.

TECHNYL STAR AF 218 V40 BK 21N

TECHNYL STAR AF 218 V40 BK 21N is a polyamide 6.6, high flow, reinforced with 40% of glass fiber, heat stabilized, for injection moulding.
Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished
part. This grade is ideal for use in the automotive industry for engine components. This grade is ideal for Mucell® injection moulding
technology.

TECHNYL STAR AF 218S V35 BK 21N

TECHNYL STAR AF 218S V35 BK 21N is a polyamide 6.6 offering high flowability, reinforced with 35% of glass fiber, heat stabilized, for
injection moulding. Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and superior surface
aspect of the finished part. This grade offers and excellent combination between thermal and mechanical properties.

TECHNYL STAR AF 219 V30 BK

TECHNYL STAR AF 219 V30 BK is a polyamide 6.6, high flow, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This
grade has enhanced moulding behaviors and better surface aspect. It offers an excellent combination between thermal and mechanical
properties. This grade restricts electrolytic corrosion. This grade is ideal for Mucell® injection moulding technology.

TECHNYL STAR AF 219 V30 BK LT

Polyamide 66, 30% glass fiber reinforced, heat-aging stabilized, high flowability, improved surface finish, for injection molding, black
TECHNYL STAR AF 219 V30 BK LT is a polyamide 6.6, high flow, reinforced with 30% of glass fiber, heat stabilized, for injection molding. One
specificity of this grade is to combine a black color and a good transmittance to infra-red wavelength, which makes it suitable for laser
welding as a transparent material. This grade offers an excellent combination between thermal and mechanical properties, and it also
restricts electrolytic corrosion.

TECHNYL STAR AF 219 V30 NC

TECHNYL STAR AF 219 V30 NC is a polyamide 6.6, high flow, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This
grade has enhanced moulding behaviors and better surface aspect. It offers an excellent combination between thermal and mechanical
properties. This grade restricts electrolytic corrosion.

TECHNYL STAR AF 60SX V25 GY 2622

Polyamide 66, 25% glass fiber reinforced, for injection molding, grey
TECHNYL AF 60SX V25 GY 2622 is a high flow polyamide 66 based on a non halogenated flame retardant system, reinforced with 25% of
glass fiber, for injection molding. This product has been specifically designed to reduce exudation and/or blooming depending of the usage
of the part. In addition, this non-halogenated flame retardant grade has a complete yellow card included full RTI down to 0.8mm, 5VA @
1.5mm and f1 rating and is as well easy to mould. This product offers his best benefit for all Electrical protection devices and not limited too,
such as well connectic and photovoltaic applications. The data provided are based on laboratory/experimental results. These data could
be adjusted after industrial production.

TECHNYL STAR AF 60SX V30 GY 7035 LPU

TECHNYL STAR AF 60SX V30 GREY 7035 LPU is a polyamide 66 based on a non halogenated flame retardant system, reinforced with 30% of
glass fiber, for injection moulding. This grade offers, in addition to a high flow matrix and a good combination of fire properties, the
particularity to decrease the level of blooming/exudation phenomena during the life time of the application.

TECHNYL STAR AF 60SX V30 ORANGE 2688

TECHNYL STAR XA 1573 ORANGE 2688 is a polyamide 66 based on a non halogenated flame retardant system, reinforced with 30% of glass
fiber, high flow, for injection moulding. This grade offers in addition to a high flow matrix and a good combination of fire properties the
particularity to decrease the level of blooming/exudation phenomena during the lifetime of the application.

Previously TECHNYL ORANGE XA 1573 ORANGE 2688

TECHNYL STAR AFX 216 V50 GY 2684

TECHNYL STAR AFX 216 V50 GY 2684 is a high flow polyamide 66 resin, reinforced with 50% of glass fibre, for injection moulding. Due to its
outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished part.

TECHNYL STAR AFX 216 V50 NC

TECHNYL STAR AFX 216 V50 NC is a high flow polyamide 66 resin, reinforced with 50% of glass fibre, for injection moulding. Due to its
outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished part.

TECHNYL STAR AFX 218 V50 BK 31N

TECHNYL STAR AFX 218 V50 BK 31N is a high flow polyamide 66 resin, reinforced with 50% of glass fibre, heat stabilized, for injection
moulding. Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the
finished part.

TECHNYL STAR AFX 218 V60 BK 31N

TECHNYL STAR AFX 218 V60 BK 31N is a high flow polyamide 66 resin, reinforced with 60% of glass fibre, heat stabilized, for injection
moulding. Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the
finished part.

TECHNYL STAR AFX 218 V60 NC

TECHNYL STAR AFX 218 V60 NC is a high flow polyamide 66 resin, reinforced with 60% of glass fibre, heat stabilized, for injection moulding.
Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished
part.

TECHNYL STAR AFX 60G1 V45 GY 2633

TECHNYL STAR AFX 60G1 V45 Grey 2633 is a high flow polyamide 66 based on a non-halogenated flame retardant system, reinforced of 45%
of glass fiber, heat stabilized, for injection moulding. This grade offers excellent electrical properties combined with flame retardancy
performance.

TECHNYL SLIDE A 218 Y10 NC

TECHNYL SLIDE A 218 Y10 NC is an unreinforced polyamide 66, medium viscosity, heat stabilized and specially modified to have improved
frictionnal properties for injection moulding. This grade offers all of the primary properties of unreinforced polyamide 66 and mainly has
excellent surface properties as low coefficient of friction and good resistance to wear.

Previously TECHNYL A 218 Y10 NATURAL

TECHNYL 4EARTH A1E 218 V35 BK H

Polyamide 66, reinforced with 35% of glass fiber, heat stabilized, for injection moulding, black.

Previously TECHNYL 4EARTH A4E 218 V35 BLACK

TECHNYL 4EARTH A1E 316 NC H

Polyamide 66, medium-high viscosity, for injection moulding, naturel.

Previously TECHNYL 4EARTH A4E 316 NATURAL

TECHNYL 4EARTH A1E 318 V25 BK

Polyamide 66, reinforced with 25% of glass fibers, heat stabilized and impact modified, for extrusion.Black.

TECHNYL 4EARTH A2E 216 BK

Polyamide 66, for injection moulding, black.

Previously ECONAMID PLUS 66 BK

TECHNYL 4EARTH A2E 216 BK H

Polyamide 66, for injection moulding, black.

Previously ECONAMID FL 66

TECHNYL 4EARTH A2E 236 BK

Polyamide 66, impact modified, for injection moulding, black.

Previously ECONAMID PLUS 66I2 BK

TECHNYL A 116ML1 WT 1133

Polyamide 66, UV-stabilized, impact modified, improved flowability, for injection moulding.

Previously DOMAMID 66LVI1UV1

TECHNYL A 206 NC Z

TECHNYL A 206 NC Z is an unreinforced polyamide PA66, medium viscosity, for injection moulding. This grade offers two main advantages:
its good resilience and its excellent filling quality of moulds.

TECHNYL A 216 BK XB

TECHNYL A 216 BK XB is an unreinforced polyamide 66, standard viscosity, for injection moulding. This grade offers all of the primary
properties of unreinforced polyamide 66: thermal and mechanical properties, chemical resistance, impact and abrasion resistance.

Previously DOMAMID 66 BKXB

TECHNYL A 216 GY 7171 XB

TECHNYL A 216 GY 7171 XB is an unreinforced polyamide 66, standard viscosity, for injection moulding. This grade offers all of the primary
properties of unreinforced polyamide 66: thermal and mechanical properties, chemical resistance, impact and abrasion resistance.

Previously DOMAMID 66 GY77171XB

TECHNYL A 216 GY 7531 XB

TECHNYL A 216 GY 7531 XB is an unreinforced polyamide 66, standard viscosity, for injection moulding. This grade offers all of the primary
properties of unreinforced polyamide 66: thermal and mechanical properties, chemical resistance, impact and abrasion resistance.

Previously DOMAMID 66 GY77531XB

TECHNYL A 216 GY R7035 LP

TECHNYL A 216 GY R7035 LP is an unreinforced polyamide 66, standard viscosity, for injection moulding. This grade offers all of the primary
properties of unreinforced polyamide 66: thermal and mechanical properties, chemical resistance, impact and abrasion resistance.

TECHNYL A 216 RD 2439 CF

TECHNYL A 216 RD 2439 CF is an unreinforced polyamide 66, standard viscosity, for injection moulding. This grade offers all of the primary
properties of unreinforced polyamide 66: thermal and mechanical properties, chemical resistance, impact and abrasion resistance.

TECHNYL A 216S V30 RD 3182 XB

Polyamide 66, 30% glass fiber reinforced, for injection moulding.

Previously DOMAMID 66G30 RD33182XB

TECHNYL A 217 NC S

TECHNYL A 217 NC S is an unreinforced polyamide 66, heat stabilized, standard viscosity, for injection moulding. This grade offers all the
primary properties of unreinforced polyamide 66. In addition it has improved resistance to high temperature and it can be used for
components which have to withstand mid term temperature stresses. This grade can also be vacuum metalized with very good surface
quality and adhesion of the aluminum surface.

TECHNYL A 218 MT25 V15 BK

TECHNYL A 218 MT25 V15 BK is a polyamide 66, reinforced with 15% of glass fibre and 25% of mineral filler, heat stabilized, for injection
moulding. This grade offers an excellent combination between thermal and mechanical properties as well as a low warpage of molded
parts.

TECHNYL A 218 S30 NC

TECHNYL A 218 S30 NC is a Polyamide PA66, reinforced with 30% of glass spheres, Heat stabilised, for injection moulding. This grade offers
an excellent combination between thermal and mechanical properties.

TECHNYL A 218Z V30 BK 34 N

TECHNYL A 218Z V30 BK 34 N is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized. This grade has been developped for
injection moulding using gas injection technology. This grade combines short time cycle and excellent internal surface aspect.

TECHNYL A 219 MT40 BK

Polyamide 66, 40% mineral filler, heat-aging stabilized, for injection moulding.

Previously DOMAMID 66M40H1

TECHNYL A 219 V15 YL 1078

Polyamide 66, 15% glass fiber reinforced, heat-aging stabilized, for injection moulding.

Previously DOMAMID 66G15H1 YL11078

TECHNYL A 219 V30 YL 1078 XB

TECHNYL A 219 V30 YL 1078 XB is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized, for injection moulding. This grade offers
an improved hydrolisis resistance, as well as an excellent combination between thermal and mechanical properties. It is also restricts
eletrolytical corrosion.

TECHNYL A 236SI V12 BK R9004

Polyamide 66, 12% glass fiber reinforced, low temperature impact modified, for injection moulding.

Previously DOMAMID 66G12IK1 BKR9004

TECHNYL A 236SI V12 GN R6026

Polyamide 66, 12% glass fiber reinforced, low temperature impact modified, for injection moulding.

Previously DOMAMID 66G12IK1 GNR6026

TECHNYL A 236SI V12 RD R3000

Polyamide 66, 12% glass fiber reinforced, low temperature impact modified, for injection moulding.

Previously DOMAMID 66G12IK1 RDR3000

TECHNYL A 238 BK 21N

TECHNYL A 238 BK 21N is an unfilled polyamide 6.6, heat stabilized, impact modified, for injection moulding. This grade offers excellent
combination between rigidity and impact resistance at ambient temperature.

TECHNYL A 239L1 V30 RD 3202

Polyamide 66, 30% glass fiber reinforced, heat-aging stabilized, UV-stabilized, impact modified, for injection moulding.

Previously DOMAMID 66G30I1H1UV1

TECHNYL A 246M NC

TECHNYL A 246M NC is an unfilled polyamide 6.6, impact modified, for injection moulding. This grade offers an excellent impact resistance,
even at low temperature.

TECHNYL PROTECT A 30G1 A GN 6009

Polyamide 66, halogenated flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 66V0A

TECHNYL PROTECT A 30G1 A GN 6023

Polyamide 66, halogenated flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 66V0A

TECHNYL PROTECT A 30H1 V25 A BK

Polyamide 66, 25% glass fiber reinforced, heat-aging stabilized, halogenated flame retardant, for injection moulding.

Previously DOMAMID FR 66G25V0AH1

TECHNYL PROTECT A 50X3 GY R7035

Polyamide 66, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

Previously DOMAMID FR 66V0M GYR7035

TECHNYL PROTECT A 50X3 NC

Polyamide 66, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

Previously DOMAMID FR 66V0M

TECHNYL PROTECT A 60G1 V20 BK

Polyamide 66, 20% glass fiber reinforced, halogen and red phosphorus free flame retardant, heat-aging stabilized, for injection moulding.

Previously DOMAMID FR 66G20V0E

TECHNYL PURE A 216E1 V25 BK

TECHNYL PURE A 216E1 V25 BK is a polyamide 66, reinforced with 25% of glass fiber, for injection moulding. This grade offers a formula
clean from additive that contains halogen and other sustances (ex: phosphorous) that can migrate and generate corrosion issues.
Electrofriendly grade. Suitable for laser printing. < 50ppm halogen content garanteed, based on internal elution analysis.

Previously TECHNYL A 216E1 V25 BLACK

TECHNYL PURE A 219E1 V30 BK

TECHNYL PURE A 219E1 V30 BK is a polyamide 66, reinforced with 30% of glass fibre, organic heat stabilized, for injection moulding. This
grade offers a formula clean of additive that contain halogen and other sustances (ex: phosphorus) that can migrate and generate
corrosion issues. Electrofriendly heat satbilized grade. Suitable for laser printing. < 50ppm halogen content garanteed, based on internal
elution analysis.

Previously TECHNYL A 219E1 V30 BLACK

TECHNYL PURE AF 219E1 V30 BK

TECHNYL PURE AF 219E1 V30 BK is a polyamide 6.6, high flow, reinforced with 30% of glass fiber, organic heat stabilized, for injection
moulding. This grade offers a formula clean of additive that contains halogen and other sustances (ex: phosphorus) that can migrate and
generate corrosion issues. Electrofriendly heat stabilized grade. Suitable for laser printing. < 50ppm halogen content are guaranteed,
based on internal elution analysis.

Previously TECHNYL STAR AF 219E1 V30 BLACK

TECHNYL SAFE A 216FC V25 BK

TECHNYL SAFE A 216FC V25 BK is a polyamide 66, 25% glass fiber reinforced, food contact approved for injection moulding. Designed to be
used in moulded parts requiring food contact compliance in industrial consumer good as well as appliance applications.

Previously DOMAMID 66G25FC BK

TECHNYL SAFE A 219WFC V50 BK

TECHNYL SAFE A 219WFC V50 BK is a polyamide 66, 50% glass fibre reinforced, heat stabilized with organic stabiliser for injection moulding.
Designed to offer an improved hydrolisis resistance and chlorine resistance vs standard PA66, for cold, warm and hot temperature in
domestic and industrial water management components including, but not limited to components in contact with drinking water where
elevated levels of chlorine could be present.

Previously TECHNYL A 218W V50 BLACK FA

TECHNYL SLIDE A 219 V20 TF20 NC

Polyamide 66, 20% glass fiber reinforced, heat-aging stabilized, for injection moulding.

Previously DOMAMID L 66G20TF20H1

TECHNYL 4EARTH A1E 218 V30 BK

Polyamide 66, 30% glass fiber reinforced, black.

TECHNYL A 216 V30 RD 2440 CF

TECHNYL A 216 V30 RD 2440 CF is a polyamide 66, reinforced with 30% of glass fiber, for injection moulding. This grade offers an excellent
combination between thermal and mechanical properties.

Previously TECHNYL A 216 V30 RED 2440 CF

TECHNYL PROTECT A 31H1 MX35 GY 174N

TECHNYL A 31H1 MX35 GREY 174N is a flame-retardant polyamide 66 reinforces with 35% of mineral filler, for injection moulding. This grade
offers excellent flame retardancy properties (UL94, GWIT) combined with excellent processing, mechanical and electrical performance.

Previously TECHNYL A 31H1 MX35 GREY 174N

TECHNYL PROTECT A 62M1 V25 BK

TECHNYL PROTECT A 62M1 V25 BK is a polyamide 66 based on a non-halogenated retardant system, reinforced with 25% of glass
pilled/fiber, for injection moulding. This grade uses a combination of additives to achieve low end part warpage while maintaining good
mechanical properties with flame retardancy and electrical performance.

Previously TECHNYL A 62M1 V25 BLACK

TECHNYL SAFE A 219FC V30 NC

TECHNYL SAFE A 219FC V30 NC is a polyamide 66, 30% glass fibre reinforced, heat stabilized with organic stabiliser food contact approved
for injection moulding. Designed to be used in moulded parts requiring an excellent combination of thermal amd mechanical properties,
good hydrolysis resistance and food contact compliance in industrial consumer good as well as appliances applications.

TECHNYL 4EARTH A2E 216L1 V30 GY 7499 H

TECHNYL 4EARTH A2E 216L1 V30 GY 7499 H is a Polyamide 66, 30% glass fiber reinforced, UV-stabilized, for injection moulding.

Previously XAE 1938 GY 7499

TECHNYL PROTECT A 20 V25 P BK

Polyamide 66, 25% glass fiber reinforced, heat-aging stabilized, red phosphorous flame retardant, for injection moulding.

Previously DOMAMID FR 66G25V0P1 501 BK

TECHNYL A 422 NC FL

TECHNYL A 422 NC FL is an unreinfoced polyamide PA66 medium viscosity for injection moulding. It is used for consumers and industrials
goods applications and is particularly suitable for injection molding of thick parts.

TECHNYL PROTECT A 50H1 BK

TECHNYL PROTECT A 50H1 BK is an unreinforced polyamide 66 based on a non-phosphorous and non-halogenated flame retardant system,
heat stabilized, for injection moulding. This flame retardant grade, offers excellent filling qualities combined with good stiffness.

Previously TECHNYL A 50H1 BLACK

TECHNYL PROTECT A 50H1 NC

TECHNYL PROTECT A 50H1 NC is an unreinforced polyamide 66 based on a non-phosphorous and non-halogenated flame retardant
system, heat stabilized, for injection moulding. This flame retardant grade, offers excellent filling qualities combined with good stiffness.

Previously TECHNYL A 50H1 NATURAL

TECHNYL A 216M NC

Polyamide 66, impact modified, for injection moulding.

Previously DOMAMID 66I1 NC

TECHNYL A 219 V50 NC

Polyamide 66, 50% glass fiber reinforced, heat-aging stabilized, for injection moulding.

Previously DOMAMID 66G50H1 NC

TECHNYL A 236SI V12 NC

Polyamide 66, 12% glass fiber reinforced, low temperature impact modified, for injection moulding.

Previously DOMAMID 66G12IK1 NC

TECHNYL A 239 V35 BK

Polyamide 66, 35% glass fiber reinforced, heat-aging stabilized, improved impact resistance, for injection moulding.

Previously DOMAMID 66G35H1 500 BK

TECHNYL A 258P1 BK 2N

TECHNYL A 258P1 BK 2N is an unreinforced and modified polyamide 66, UV and thermal stabilized for injection moulding. This grade offers
two main advantages: an excellent impact resistance at ambient and low temperature and a high flexibility.

TECHNYL A219L1 V40 NC

Polyamide 66, 40% glass fiber reinforced, heat-aging stabilized, UV-stabilized, for injection moulding, natural color.

Previously DOMAMID 66G40H1UV1 NC

TECHNYL PROTECT A 20 V35 NC

TECHNYL PROTECT A 20 V35 NC is a Red Phosphorous flame retardant polyamide 66, reinforced with 35% of glass fiber, heat stabilized, for
injection moulding. This grade provides robust UL 94 V-0 and a full UL yellow card while offering good mechanical properties. This grade is
suitable for moulding insulating parts for electrical devices, and more generally for thin parts under stress.

Previously TECHNYL A 20 V35 NATURAL

TECHNYL SHAPE A 548B2 V15 BK 23N

TECHNYL SHAPE A 548B2 V15 BK 23N is a polyamide 6.6, reinforced with 15% of glass fibre, heat stabilized, impact modified, for blow
moulding. This grade offers an excellent long term Heat resistance and is suitable to work in environments characterized by a very high
temperature. It has been also specially designed to be perfectly suitable for blow moulding processing.

Previously TECHNYL A 548B2 V15 BLACK 23N

TECHNYL A 119 S15 BK

Polyamide 66, 15% glass beads, heat-aging stabilized, improved flowability, for injection moulding.

Previously DOMAMID 66LVB15H1

TECHNYL PROTECT A 50X1 GY 2610 LP

TECHNYL A 50X1 GY 2610 LP is an unreinforced blend of polyamide 66 and 6 based on a non-phosphorous and non-halogenated flame
retardant system, heat stabilized, for injection moulding. This flame retardant grade, UL94 V0 at 0.4mm, offers excellent filling qualities
together with good stiffness.

TECHNYL PROTECT A 50X3 BK

Polyamide 66, heat-aging stabilized, halogen and red phosphorus free flame retardant, for injection moulding.

Previously DOMAMID FR 66V0M BK

TECHNYL STAR AF 60SX V30 ORANGE 2703

TECHNYL STAR AF 60SX V30 ORANGE 2703 is a high flow polyamide 66 based on a non halogenated flame retardant system, reinforced of
30% of glass fiber, for injection moulding. This product has been specifically designed to resolve the problematic of exudation and/or
blooming depending on the usage of the parts. In addition, this product is a non-halogenated flame retardant grade with a complete yellow
card included full RTI down to 0.8mm, 5VA @ 1.5mm and f1 rating. This product is as well easy to mould. This product offers his best benefit
for all Electrical protection devices and not limited too, such as well connectic and photovoltaic application.

Previously TECHNYL XA 1573 ORANGE 2703

TECHNYL A 219 V30 NC

TECHNYL A 219 V30 NC is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized, for injection moulding. This grade offers an
improved hydrolisis resistance, as well as an excellent combination between thermal and mechanical properties. It is also restricts
eletrolytical corrosion.

Previously TECHNYL A 218W V30 NATURAL TE / DOMAMID 66G30H1 NC